If you want to connect both the bus and the computer via USB-C via the Programmer to a circuit board at the same time, it is recommended to galvanically isolate the USB-C connection to prevent damage caused by different ground potentials.
This USB-C isolator does just that:
It provides both power (max. 600 mA at 5 V) and data (USB 2.0, full speed) from the computer (host) to the device (device) without galvanically connecting them.
To do this, simply connect the computer on the host side (H) and the device via the Programmer connected on the device side (D) via USB-C cable.
USB-C to USB-A and USB-C connection cables can be ordered if required.
If you have any questions or feedback, please make contact!
