This is a compact PoE (Power over Ethernet) HAT for the Raspberry Pi Zero 1 and 2(W).
It supports GBit Ethernet (1000 MBit) and provides an additional USB-C port for the Raspberry Pi.
Detailed specifications:
- Realtek RTL8153B Ethernet chip, with 10/100/1000 MBit auto-negotiation RJ45 connector
- PoE (Power over Ethernet) function, 802.3af compatible, Class 3
- PoE supply voltage: 37V – 57V DC
- Current output: 5V, max. 2.5A DC
- Fully isolated SMPS (Switch Mode Power Supply)
Since this PoE HAT is connected to the Pi Zero from below using spring/pogo pins, it does not take up space for other HATs, which can still be plugged onto the Pi Zero from above.
Scope of delivery:
- PoE board
- 4x spacer bolts M2.5, 15 mm
- 4x spacer bolts with pin M2.5, 6 mm
- 4x screw Torx T8 M2.5, 4 mm
If you have any questions or feedback, please make contact!
